10 Inch Network Equipment Server Cabinet Rack Open Frame / Server
1. Material:Cold rolled steel with powder coat finishing
2. 19 inch standard floor open network server racks45U.
3. With fixing panels
4. Screw type
5. With feet
6. Size: 12U, 18U, 20U, 24U
7. Packing:Whole pack or in Bulk
1. Front door and side door easy to install and maintain.
2. Cable entry on the top cover and bottom panel with adjustable
3. Popular front door with toughened glass.
4. Painting color:black and grey on your requirement .
1. Main material: Cold rolled steel.
2. Surface finish:Degreasing, pickling, phosphoric, powder coated.
3. Degree of protection:IP20.
Power Panel ;Fixed Shell;Cabinet Fans.
This cost-effective range of server cabinets is available in a
combination of 600mm or 800mm widths with a 600mm,800mm or 1000mm
depth. All cabinets are available in 18U to 45U heights with either
a glass or mesh front door.
Complied with Standards:
ANSI/EIA RS-310-DIEC297-2DIN41494;PART1DIN41494;PART7, ETSI
Mounting Rail: 1.5mm,Frame of front door: 1.5mm,Mounting
Standard Accessory :
A.screw and nut. B.with 4pcs castor and adjusters. C.with 2 fixed
shelf. D.with 2 fans for 600*600 type, 4fans for 600*800 and
600*1000type. E.1 piece PDU
Lockable and reversible quick-release front and rear doors
Perforated steel rear door
Two lockable quick-release lift-out steel side panels
Fully adjustable front & rear profiles with U height markings
Removable roof panel for flood wiring or cooling
Adjustable size bottom cable access aperture
Manufactured from SPCC cold rolled steel
With Ventilated door which is better for abstraction of heat .
Data and telecom network, LAN and file server workstation or
computer control center system.
|Main material||Cold rolled steel|
|Capacity/U||18/20/25/30/35/42U,as customer required|
|Thickness||Mounting Rail: 1.5mm,Frame of front door: 1.5mm,Mounting Rail:
|Degree of Protection||IP20|